Daihatsu Prox

Existing remotes must be re programmed:

Drops out oldest

Starting state:
Doors closed key out of Ignition interior light on auto

Step 1:
Open then close the drivers door

Step 2: Jump 4 and 13 on OBD

Step 3:
Turn Ignition on with programmed transponder key

Step 4: Turn from On to Acc 3x

Step 5: Locks will cycle

Step 6: Remove Key from ignition

Step 7:
Press Lock and unlock together until buzzer beeps 2x

Step 8: Release then press 1 button

Step 9: Car will beep again

Notes:

Speed! 3 second from Jumping and quickly for 2nd press

If you only have an existing Prox, on a purple one use the opposite corner to the buttons or on the black one opposite to the emergency key to be able to turn ignition. A number of the transponders inside the Prox have never been programmed. If this is the case then you will need to Eeprom a transponder